Arduino MKR1000 WIFI

41.18

Arduino MKR1000 is a powerful board that combines the functionality of the Zero and the Wi-Fi Shield. It is the ideal solution for makers wanting to design IoT projects with minimal previous experience in networking.

1 in stock

Share
Category

    The MKR 1000 WiFi is a great choice for any beginner, maker or professional to get started with Internet of Things (IoT). Using the popular Arm® Cortex®-M0 32-bit SAMD21 processor, it also features the and the ECC508 crypto-chip for security. The board is part of the MKR family, where you can choose from a large variety of shields to build projects out of the box with minimal effort!

    Board Name Arduino® MKR 1000 WiFi
    SKU ABX00004
    Compatibility MKR
    Microcontroller SAMD21 Cortex®-M0+ 32bit low power ARM MCU
    USB connector Micro USB (USB-B)
    Pins Built-in LED Pin 6
    Digital I/O Pins 8
    Analog Input Pins 7 (ADC 8/10/12 bit)
    Analog Output Pins 1 (DAC 10 bit)
    PMW Pins 12 (0 – 8, 10, A3, A4)
    External interrupts 10 (0, 1, 4, 5, 6, 7, 8 ,9, A1, A2)
    Connectivity Wi-Fi ATWINC1500 (part of ATSAMW25 SoC)
    Secure element ATECC508A
    Communication UART Yes
    I2C Yes
    SPI Yes
    Power I/O Voltage 3.3V
    Input Voltage (nominal) 5-5.5V
    DC Current per I/O pin 7 mA
    Supported battery Li-Po Single Cell, 3.7V, 1024mAh Minimum
    Battery connector JST PH
    Clock speed Processor 48 MHz
    RTC 32.768 kHz
    Memory SAMD21G18A 256KB Flash, 32KB SRAM
    Dimensions Weight 32 g
    Width 25 mm
    Length 61.5 mm